- Home /
- Propulsion & Around The Engine /
- Exhaust Systems /
- Vetus Gooseneck LT 65-152 mm
Products
- Batteries
- Boat Hardware
- Comfort
-
Electrical
- Electrical Procured
- Battery Switch
- Busbars, Terminals & Insulators
- Cable Management
- Circuit Breakers
- Deck Seals
- Electrical Panels
- Electrolysis Protection
- Engine Instruments
- Fuses & Fuse Blocks
- Heat Shrink
- Horns
- Meters
- Plugs & Sockets
- Single & Multi-Core Cables
- Switches
- Tank Senders
- Terminals & Crimps
- Accessories, Upgrades & Spares
-
Marine Electronics & Raymarine
- Element Hv
- Antennas
- Autopilots
- Axiom Range
- Digital Switching
- Electronic Charts
- Element Series
- Fishfinder/Sonar Modules
- Instruments
- Marine AIS Devices
- Marine Cameras
- Mounting Systems
- Networking & Cables
- NMEA Converters & Sensors
- Radar
- Satellite TV
- Thermal Cameras
- Transducers
- VHF Radios
- Accessories, Upgrades & Spares
- Marine Lighting
- Power Generation & Management
- Propulsion & Around The Engine
- Pumps
- Safety Solutions
- Sanitation & Tanks
- Steering Control & Trim
- Tenders & Inflatables
- Vessel Manoeuvring Systems
- Watermakers
- Winches & Cranes
Vetus Gooseneck LT 65-152 mm
A Vetus gooseneck raises the exhaust hose above the waterline so that water cannot backfill the exhaust system. After the engine is stopped, all cooling water in the exhaust hose will run to the lowest point of the system which is where the waterlock should be situated. In order to limit the quantity of water the gooseneck should be fitted as closely as possible behind the waterlock. If required it may also be fitted directly onto the transom exhaust connection (TRC40R).
Exhaust Hose Diameter (mm) | Dimensions (mm) | |
LT6565 | 65 | 235 x 155 x 500 |
LT6575 | 75 | 235 x 155 x 500 |
LT7575 | 75 | 235 x 155 x 500 |
LT90110 | 90 | 300 x 210 x 525 |
LT9090 | 90 | 300 x 210 x 525 |
LT102 | 102 | 300 x 210 x 525 |
LT110110 | 110 | 300 x 210 x 525 |
LT127 | 127 | 380 x 275 x 565 |
LT152 | 152 | 380 x 275 x 565 |