Jabsco Wake/Ski Boat Ballast Pump

Jabsco Wake/Ski Boat Ballast Pump

The Jabsco Ballast Puppy is designed to pump water into wakeboard liquid ballast tanks and when reversed will also pump water out of them.

It has a flow rate of 34LPM, so it can fill most ballast tanks in about five minutes. It is equipped with a run-dry protection device to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the ballast tank is empty.

Bronze body.   Special impeller for ease of reversing part number 6303-0007. Seal: Lip Type. Connections: 1/2" Internal, 1” External hose barb. 12VDC

Code Image Product Details Enquire
18220-1127
Jabsco Wake/Ski Boat Ballast Pump
Wake/Ski Ballast Pump
Make an Enquiry

Connections: - for 25mm (1”) bore hose or ½” BSP

Dimensions: - 181mm long, 121mm wide, 92mm high

Maximum Current: - 11.5(amps)

Output: - up to 40 litres/minute (9 gallons/minute)

Fills a typical 180 litre ballast tank in under 5 minutes

Reversible to both fill and empty tanks

Self-priming and non air-locking

Bronze body, stainless steel shaft

Packaged Dimensions: L:22.00 x H:9.00 x W:13.00cm

Actual Weight: 3.22 Kg  (Approx. 3.72 Kg packed)

Related Products