- Home /
- Electrical /
- Battery Switch /
- Hella Battery Switch
Products
- Batteries
- Boat Hardware
- Comfort
-
Electrical
- Electrical Procured
- Battery Switch
- Busbars, Terminals & Insulators
- Cable Management
- Circuit Breakers
- Deck Seals
- Electrical Panels
- Electrolysis Protection
- Engine Instruments
- Fuses & Fuse Blocks
- Heat Shrink
- Horns
- Meters
- Plugs & Sockets
- Single & Multi-Core Cables
- Switches
- Tank Senders
- Terminals & Crimps
- Accessories, Upgrades & Spares
-
Marine Electronics & Raymarine
- Element Hv
- Antennas
- Autopilots
- Axiom Range
- Digital Switching
- Electronic Charts
- Element Series
- Fishfinder/Sonar Modules
- Instruments
- Marine AIS Devices
- Marine Cameras
- Mounting Systems
- Networking & Cables
- NMEA Converters & Sensors
- Radar
- Satellite TV
- Thermal Cameras
- Transducers
- VHF Radios
- Accessories, Upgrades & Spares
- Marine Lighting
- Power Generation & Management
- Propulsion & Around The Engine
- Pumps
- Safety Solutions
- Sanitation & Tanks
- Steering Control & Trim
- Tenders & Inflatables
- Vessel Manoeuvring Systems
- Watermakers
- Winches & Cranes
Hella Battery Switch
Hella Battery Switch.
Hella Heavy Duty Battery Switch – for trucks, buses and earth moving equipment. Complete with removable key. Replacement key available.
Battery Master Switch with sealing cap – suitable for cars and medium sized trucks, with a continuous rating of 250 amps. Provides effective protection against theft and fire in case of accidents. With sealing cap when not in use which doubles as a key holder.
Part Number: | 6EK 001 559-001 | Battery Master Switch - Off/On - Heavy Duty |
Mounting: | 22mm diameter opening | |
Maximum Load: 12V | 5000A for 10 seconds | |
Maximum Load: 24V | 2500A for 10 seconds | |
Maximum Continuous Load: | 12/24V 100A continuous at a maximum ambient temperature of 60°C with 50mm2 lead connected with ring-type terminals. | |
Termination: | 2 x 10mm studs | |
Protection: | IPX4 | |
Note: Switch not designed for marine applications. |
Part Number: | 6EK 002 843-141 | Battery Master Switch - Off/On - with sealing cap |
Mounting: | 22mm diameter opening | |
Maximum Load: 24V | 2500A for 10 seconds | |
Maximum Continuous Load: | 12/24V 250A | |
Termination: | 2 x 10mm studs | |
Protection: | IP65 | Protection against dust and water jets |
6EK 001 559-001 - Battery Master Switch - Off/On - Heavy Duty:
6EK 002 843-141 - Battery Master Switch - Off/On - with sealing cap: