Search

Victron Blue Smart IP67 Chargers

Victron Blue Smart IP67 Chargers

HTML Editor - Full Version

The Blue Smart IP67 Battery Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin.

Code Image Product Details Enquire
BPC120713016
Victron Blue Smart IP67 Chargers
12V - 7A - AU/NZ Plug
BPC121347016
Victron Blue Smart IP67 Chargers
12V - 13A - AU/NZ Plug
BPC121713016
Victron Blue Smart IP67 Chargers
12V - 17A - AU/NZ Plug
BPC122547016
Victron Blue Smart IP67 Chargers
12V - 25A - AU/NZ Plug
BPC240547016
Victron Blue Smart IP67 Chargers
24V - 5A - AU/NZ Plug
BPC240815106
Victron Blue Smart IP67 Chargers
(120V USA) 24V - 5A - NMEA 5-15
BPC240847016
Victron Blue Smart IP67 Chargers
24V - 8A - AU/NZ Plug
BPC241247016
Victron Blue Smart IP67 Chargers
24V - 12A - AU/NZ Plug
IP67 Blue Smart Battery Charger: 12/7 12/13 12/17 12/25 24/5 24/8 24/12
Input Voltage range and frequency: 180-265 VAC  45-65 Hz
Efficiency: 93% 93% 95% 95% 94% 96% 96%
No Load power consumption: 0.5W
Charge voltage absorption: Normal: 14.4V High: 14.6V Li-on: 14.2V Normal:  28.8V High: 29.2V Li-on: 28.4V
Charge voltage float: Normal: 13.8 V High: 13.8V Li-on: 13.35V Normal: 27.6V High: 27.6V Li-on: 26.7V
Charge voltage storage: Normal:  13.2V High: 13.8V Li-on: na Normal: 26.4V High: 26.4V Li-on: na
Charge current, normal mode: 7A 13A 17A 25A 5A 8A 12A
Charge current, LOW: 2A 4A 6A 10A 2A 3A 4A
Charge algorithm: 4-Stage Adaptive
Can be used as power supply: Yes
Protection: Battery reverse polarity (fuse) / Output short circuit / Over temperature
Operating temp range: -20 to +60°C (full rated output to 40°C) Derate 3% per °C above 40°C
Humidity: Up to 100%
Start interrupt option (Si): Short circuit proof, current limit 0.5A
Output voltage: max one volt lower than main output