- Home /
- Vessel Manoeuvring Systems /
- Bowthrusters /
- Bow Pro DC Thrusters /
- Vetus 150KGF Bow Pro Boost 250mm Tunnel
Products
- Batteries
- Boat Hardware
- Comfort
-
Electrical
- Electrical Procured
- Battery Switch
- Busbars, Terminals & Insulators
- Cable Management
- Circuit Breakers
- Deck Seals
- Electrical Panels
- Electrolysis Protection
- Engine Instruments
- Fuses & Fuse Blocks
- Heat Shrink
- Horns
- Meters
- Plugs & Sockets
- Single & Multi-Core Cables
- Switches
- Tank Senders
- Terminals & Crimps
- Accessories, Upgrades & Spares
-
Marine Electronics & Raymarine
- Antennas
- Autopilots
- Axiom Range
- Digital Switching
- Electronic Charts
- Element Series
- Fishfinder/Sonar Modules
- Instruments
- Marine AIS Devices
- Marine Cameras
- Mounting Systems
- Networking & Cables
- NMEA Converters & Sensors
- Radar
- Satellite TV
- Thermal Cameras
- Transducers
- VHF Radios
- Accessories, Upgrades & Spares
- Marine Lighting
- Power Generation & Management
- Propulsion & Around The Engine
- Pumps
- Safety Solutions
- Sanitation & Tanks
- Steering Control & Trim
- Tenders & Inflatables
- Vessel Manoeuvring Systems
- Watermakers
- Winches & Cranes
Vetus 150KGF Bow Pro Boost 250mm Tunnel
At the top of this advanced range of thrusters, VETUS offers the BOW PRO Boosted series (BOWB), innovative and significantly different from existing thrusters. All the features of the amazing BOW PRO with a bonus! There is a third connection on the motor, leading current to an internal charger which steps up the voltage from 12 to 24 volt, allowing a 12-volt charging source such as the propulsion engine alternator, to charge a 24-volt battery bank. Connecting the BOW PRO Boosted directly to a 24-volt power supply is also possible of course. The built-in charger recharges your battery bank when the thruster is not in use, doubling the value of having the BOW PRO Boosted thruster on your boat.
BOW PRO thrusters use proven induction motors without carbon brushes. As a result, the bow thruster motor is maintenance-free and has Endurance Rated* run-time! Only the tailpiece anode and the power circuits need regular maintenance. The induction motor is controlled by the VETUS MCV motor controller which can handle both 12 V and 24 V on board systems, making the new BOW PRO thruster suitable for almost all boats. The built-in over-temp and low battery voltage protection combined with the brushless induction motor make the BOW PRO thruster series highly resistant to abuse and ideal for beginning boaters and experienced captains!
The BOW PRO thruster is controlled by a proprietary CANBUS protocol (digital control) network. There are two fully proportional panels available for the BOW PRO thruster series; one standard panel (BPPPA) and one panel with lock-and-hold capability for easy docking (BPPJA). BOW PRO thrusters utilize the same propellers and gearboxes proven in VETUS thrusters for over 30 years. Upgrading a boat with an existing thruster to a BOW PRO thruster is easily achieved as the BOW PRO thruster was made to share tunnel sizes with current VETUS thrusters as well as many other brands. The overview photo shows which type and size boats are currently compatible with the BOW PRO series.
Proportional: Yes
Thrust: 150N/KGF
Power: 5.7KW
Internal Tunnel Diameter: 250MM
Weight: 37KG
Voltage: 12V/24V
Current Consumption: 300A
Continuous Operating Time: 6 MIN
Ignition Protected: No
Retractable: No
Extended Runtime: No
Related Products
-
12VDC, Thruster Only, No Tunnel, Controller or Wiring HarnessBOW2512E