16 Channel DC Load Controller Module
For larger loads and more circuits, the CLMD16 is a 16-Channel DC Load Controller Module. Four of the 16 breakers handle a maximum of 25 amps and twelve breakers handle a maximum of 12 amps with a total current capacity of 125 amps. Additionally, circuits can be paralleled.
The CLMD16 also supports two 12A H-Bridge reversing polarity circuits that can be used for loads such as engine hatches, passerelles, trim tabs, etc. The CLMD16 has 8 inputs for hard-wired switches that can be used to switch breaker states, or as inputs for other data such as bilge alarms or hatch positions, etc. There are 2 resistive inputs and 1 current loop input that can be used for various applications including tank level monitoring.
The CLMD16 handles many DC load types such as lights, pumps, motors, and electronics. An added benefit of the CLMD16 is that it reports the current through each of the 16 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report over current faults and undercurrent conditions.
| Code | Image | Product Details | Enquire |
|---|---|---|---|
|
0413-204-2005
|
|
J3 Connector Seal Plug, 20 HD SER, Deutsch
|
|
|
0462-201-20141
|
|
J3 (I/O Gen Purpose) 16-20AWG Socket, Deutsch
|
|
|
0462-203-12141
|
|
J1 Output 14AWG Socket, Deutsch
|
|
|
A3708
|
|
Output J2 Mating Connector with 1m Flying Leads
|
|
|
A3709
|
|
Output J1 Mating Connector with 1m Flying Leads
|
|
|
A3710
|
|
J3 (I/O Gen Purpose) Harness Kit
|
|
|
CLMD16
|
|
16 Channel DC Load Controller Module
|
|
|
CLMD16-R
|
|
16 Channel DC Load Controller Module with A3708, A3709 & A3710
|
|