- Home /
- Power Generation & Management /
- Accessories, Upgrades & Spares /
- CTEK Comfort Indicator
Products
- Batteries
- Boat Hardware
- Comfort
-
Electrical
- Electrical Procured
- Battery Switch
- Busbars, Terminals & Insulators
- Cable Management
- Circuit Breakers
- Deck Seals
- Electrical Panels
- Electrolysis Protection
- Engine Instruments
- Fuses & Fuse Blocks
- Heat Shrink
- Horns
- Meters
- Plugs & Sockets
- Single & Multi-Core Cables
- Switches
- Tank Senders
- Terminals & Crimps
- Accessories, Upgrades & Spares
-
Marine Electronics & Raymarine
- Element Hv
- Antennas
- Autopilots
- Axiom Range
- Digital Switching
- Electronic Charts
- Element Series
- Fishfinder/Sonar Modules
- Instruments
- Marine AIS Devices
- Marine Cameras
- Mounting Systems
- Networking & Cables
- NMEA Converters & Sensors
- Radar
- Satellite TV
- Thermal Cameras
- Transducers
- VHF Radios
- Accessories, Upgrades & Spares
- Marine Lighting
- Power Generation & Management
- Propulsion & Around The Engine
- Pumps
- Safety Solutions
- Sanitation & Tanks
- Steering Control & Trim
- Tenders & Inflatables
- Vessel Manoeuvring Systems
- Watermakers
- Winches & Cranes
CTEK Comfort Indicator
CTEK Comfort Indicator is the easiest way to monitor the charge in your battery. An accurate reading is displayed 2 hours after you have used your vehicle.
RED means the battery is below 12.4V. It is time to charge.
YELLOW means the battery charge is between 12.4V and 12.65V. It is time to start thinking about charging the battery.
GREEN means the battery charge is more than 12.65V. OK! No need to charge.
With comfort indicator – eyelet you have a permanent installation. Should charging be required plug in the CTEK charger and charge the battery. Cable length 500 mm.
Accessories available in the comfort indicator range include a cig plug a combined quick connector and indicator for easy charging perfect for checking status and charging the battery through the vehicle 12V socket, easy to move clamp, panel with flat pin connectors, and a pigtail to convert an existing SAE quick connector into a sealed indicator of the status of your battery.